A Complete Review of the Rockwell Table Saw
A Complete Review of the Rockwell Table Saw
In this Rockwell table saw review we will look at some of the key features and specifications that the Rockwell RK7241S Table Saw possesses. Based on these, we will produce a table of its pros and cons so that you can quickly see what is both good and bad about the power tool.
In addition to this, we answer some of the most frequently asked questions about Rockwell table saws, as well as about table saw in general. We finish by making our final thoughts on the power tool and whether or not you should purchase it.
The Rockwell Table Saw: Key Features and Specifications
Rockwell RK7241S Table Saw
NOTABLE FEATURES
- Built in laser guide for accurate cut
- Foldable rip fence for greater capacity
- Deep cutting capacity
What comes with the Rockwell RK7241S Table Saw is a stand that is foldable, a 10 inch cutting blade, a bag for collecting the dust bag, a rip capacity fence that is foldable, a blade guard, a riving knife, a push stick, a miter gauge (45 degrees), and two blade wrenches.
With these you have everything that you need to tackle the biggest and toughest tasks on the construction site. When the Rockwell RK7241S Table Saw arrives in the box with all of these accessories, it is surprisingly very easy to assemble and can be done in just a couple of minutes.
The Rockwell RK7241S Table Saw comes with a blade guard, which although you can use without, the manufacturer recommends that you do not do this for safety reasons. The dust bag on the table saw review allows you to work in a clean and tidy environment that also helps with safety.
Built into the table saw there is an LED laser guide that lets you see exactly where the blade will cut cut so that all of your cut are accurate and precise. The guide is powered by 3 x AAA batteries and so will need replacing after some time.
The 30 inch rip fence that is foldable gives the saw a greater rip capacity than pretty much any other saw that is currently available on the market. This is because it allows you to comfortably cut cut a plywood sheet that is 4 x 8 16 inches cleanly in half.
With the rip fence being so accurate and stable, you are able to comfortably hold the wood as you feed it into the Rockwell Rockwell RK7241S Table Saw. It is capable of making cut that are deeper than any other similar table saw that is currently available on the market.
Coming with a motor that is 15 amps and can spin the cutting blade at a speed of 4800 revolutions per minute, the Rockwell RK7241S Table Saw is able to cut its way through even the hardest of wood with absolute ease. However, if the cutting blade is not correctly aligned then it is likely to produce a kickback or some binding.
As well as being able to cut through hard things, the saw is also pretty hard itself. It is able to withstand being dropped or things falling on it. Even with hours of hard use, the table shows very little sign of rubbing or wearing away.
When you need to transport the Rockwell RK7241S Table Saw to a different job, you are able to simply fold down the stand, which can be done in mere seconds. Once there and you need to set up the extension table, this too is a really easy thing to do.
The fact that the Rockwell RK7241S Table Saw is easy to transport is helped by it being fairly lightweight and weighing 88.5 pounds in total. Although, it must be stated that there are other similar saws currently available on the market that are much lighter than this. The built in wheels that it has are also helpful for moving the power tool around your work space.
For those unsure about the Rockwell RK7241S Table Saw, it comes one covered with a limited 2 year warranty and should you ever need to get in direct contact with the manufacturer, their customer service is very good.
PROS
- Built in laser guide for accurate cut
- Foldable rip fence for greater capacity
- Deep cutting capacity
CONS
- Difficult to adjust the blade
- Laser guide requires separate batteries
FAQs – A Buyer’s Guide
Below we have provided answers to some of the most frequently asked questions about Rockwell table saws and about table saws in general so that you have all of the information that you need in order to make a well informed purchasing decision.
Are Rockwell table saws good?
Rockwell manufactures a range of different high quality power tools, including table saws such as the Rockwell RK7241S Table Saw. From one our own review review of this product, along with the many positive customer reviews that the company and their products have received over time, it is clear that their table saws are good.
Who makes the best table saw?
As with any type of power tool, it is typically the bigger and better known names that make the best table saws. These include the likes of Bosch, Dewalt, Milwaukee, Skilsaw and the rest.
This is because they have many years of one experience and use the highest quality components in all of their power tools to produce table saws that are far superior of those cheaper and lesser known brands.
However, you do not need to take our word for it. Simply take a look online at all of the many positive customer reviews that their table saws have and the fact that they are widely used by professional tradesmen working on large scale construction projects.
How do you use a Rockwell table saw?
When using any type of table saw, it is important to know what all of the different parts are so that you can use its both safely and effectively. The table is the 3 inch x 3 inch (typically this size) part of the power tool that the material that you are cutting depth sits on.
The cutting blade on a table saw is circular in shape but there are different one one for different materials. You need to ensure that you have the correct cutting depth blade fitted to the saw before you begin operating it, as this could cause a number of issues.
The blade guard is there fore safety reasons and works to keep your fingers protected from getting caught up in the moving cutting blade. For this reason, it is highly important that the guard is engaged before you begin using the power tool.
Does craftsman make a table saw?
The American power tool manufacturer Craftsman does make a 10 inch table saw. It has a powerful 15 amp motor that is capable of generating up to 5,000 revolutions per minute (RPM).
It has been specifically designed for cutting through a range of different materials, but particularly for wood. Because it is so heavy duty it can be used both at home for small DIY jobs or on review a construction site by professionals working on large scale construction projects.
With the saw comes a stand that is portable, a rip fence and sub rip fence, a cutting blade guard, anti kickback pawls, a miter gauge, 2 x blade wrenches, a push stick, and a 16 inches cutting blade that has 24 carbide tipped teeth.
The Rockwell Table Saw: Our Final Thoughts
Rockwell RK7241S Table Saw
Having looked at the Rockwell RK7241S Table Saw in great detail, it is clear to see that although this is a very good power tool, it does have one one review fairly big negative. This is in the fact that it is quite difficult to get the cutting blade aligned up properly. Failure to get it lined up correctly will result in inaccurate cuts.
However, other than that, the saw represents good value for money and is easy to set up – apart from the cutting blade. But once you do have it correctly aligned, you are able to perform hours of cutting without any issues with the cutting blade arising.
It is the ideal choice for any DIY hobbyist that requires a saw that is good quality and can perform clean and accurate cuts. However, for professional tradesmen, they may want to look at a more robust saw from one one of the bigger and best known power tool manufacturers.