Skip to content

Dremel 4000 vs 4200 – Which Tool Can Serve You Better?

Rotary tools such as those made by Dremel come handy when handling tasks such as polishing, grinding, sanding, carving and cutting. Many professionals as well as home owners love Dremel rotary tools due to their high quality construction and versatility. Dremel tools are very marketable because they are applicable in a wide range of jobs including that range from home to industrial projects.

In this comparison, we are going to look at how the Dremel 4000 and 4200 perform on different projects and applications.

Table could not be displayed.

Both of these tools are high speed rotary tools that are designed for both professionals and amateur woodworkers at home. The good thing is that Dremel tools let you tackle different jobs with the right speed and accuracy. However, if you are working on soft materials such as wood and plastic, you can set lower speeds on the tools.

Therefore, it is important to have the right information on both the 4000 and the 4200 so that you can tell the one that will suit your project the best. The choice of the right tool depends on what you really want to do with it. Below, we will look at the features that will help you determine the better tool among the two. But before we do that, it is advisable to look at each of these tools individually.

At the end of this review, you are going to be sure of the tool that will offer you with the best service and value. However, this will require a keen eye especially since the two tools are very similar in both features and looks. Nevertheless, there are several improvements that are seen on the Dremel 4200.

Dremel 4000 vs 4200 Comparison

The Dremel 4000 is one of the best rotary tool choices on the market that is capable of cutting through tough materials such as steel and tiles. The tool not only comes with an EZ nose twist cap for fastening attachments and bits, but also with a separate speed and power switch to enable users to have an easier control on the device.

On the other hand, the Dremel 4200 is fitted with a 1.6 amp motor that delivers ample power Dremel tasks. The motor runs at a speed of between 5000 and 35000 rpm. One of the most interesting things about the Dremel 4200 is that it has a separate on and off switch that is used to power the tool. This can enable you to conveniently stop the device either when changing accessories or adjusting your materials.

The good thing is that you can use the switch to set the speed at which you want to operate the device. In addition, this system keeps memory in that, when you turn the tool on the next time, you are able to get back to the last speed that you were running at.

Back to the 4000: this Dremel is very impressive as it provides great torque at low speed. In addition, the tool comes with lower weight that reduces fatigue on users working on heavy duty projects.  And as we with the Dremel 4200 vs 4000 comparison, it is also important to note that the 4000 comes with a long cord that offers a good range when working on large pieces.

Check out the price of the Dremel 4000

In addition, the variable speed allows you to get the best results on both soft and hard materials.  There are many reviews on Dremel 4000 vs Dremel 4200 online and most of them are in agreement that the Dremel 4000 has the best performance and versatility that you will find on any rotary tool available.

As a standard, the tool comes with a 1.6 amp motor that spins at the speed of between 5000 and 3500 revolutions per minute. Also, you will find that this tool is fitted with an electronic feedback circuitry that enables it to produce more torque at lower speeds.  

The 4200 on the other hand is fitted with a better cooling system that greatly minimizes the risk for overheating. Meaning the tool can be used for a long time but still remain relatively cool.

Back to the Dremel 4000: will find that the tool has an ergonomically slim design that enables it to fit comfortably on your hands. This ensures that you can use the device for hours without feeling fatigued or tired. This tool is compatible with all existing Dremel attachments and accessories. In fact, the Dremel 4200 vs 4000 analysis shows that this tool can enable you to handle a lot of tasks at home.

In contrast, the 4200 comes with a convenient carrying case that enables users to carry the tool easily to different work stations. Also, the 4200 comes with an ergonomic design that makes it easy for people with both big and small hands to hold the tool.

You can hold this device in different ways depending on the type of job that you are doing.  There are 3 kit options that are available for the 4200 this provides you with a wide range of tools and attachments to use in your projects.

Check out the price of the Dremel 4000

Differences Between Dremel 4000 and 4200

As we look into which tool is better between the Dremel 4000 and 4200, it is important to note the differences between the two. These differences will help you identify the tool that will meet your needs the best. Therefore, you need to look at the parameters below:   

Note Their Different Accessory Change Systems

One of the Dremel 4000 vs 4200 difference is notable in the accessory change system.  The 4000 uses the Dremel’s EZ nose twist cap method that secures the bit through the use of a wrench. The good thing is that the system comes with an integrated wrench system for tightening and loosening the collet nut when changing accessories.

On the other hand, the Dremel 4200 uses an EZ change mechanism that works as a pull lever system. This system replaces the ordinary collet nut and allows for an accessory change without needing any additional tool.  

Looking at the difference Dremel 4000 vs 4200 on accessory change mechanism, we can clearly declare the 4200 as the winner. This is because you do not need any tool to change accessories.

The Diverse Kit Options

Another feature to consider in the Dremel tool model 4000 vs 4200 is the kit option. The Dremel 4000 has 4 kit options namely: 4000-3/34, 4000-2/30 and 4000-4/34. On the other hand, the 4200 comes in 3 kit options including: 4200-6/40, 4200-4/36 and 4200-8/64. All these options can enable you to handle different tasks both at home and in your workshop.

When it comes to kit option, the winner is the Dremel 4000. However, you can handle all the tasks that you want with the Dremel 4200 kits. The choice here is dependent on the tasks that you are looking to handle most.

Check out the price of the Dremel 4000

Which Feels Better on Your Hands

Before you make a choice between Dremel tool 4200 vs 4000, it is important to consider the tool that feels best on your hands. This is because this consideration will greatly determine your overall experience with the tool. Above, we saw that the 4200 is the lighter option amongst the two tools.

This is especially because the unit weighs only 2.5 pounds when compared to the 4000’s 2.8 pounds. The lower weight of the 4200 can come handy when handling heavy-duty project that require you to work for many hours as it can delay the onset of fatigue. Any professional woodworker will tell of the effects that fatigue has on their performance.

Also, the 4200 is the better option when it comes to the ergonomics of Dremel rotary tools. This is because it has a comfortable handle that allows your finger to contour well. As a result, you will have an easy time using the device.

Conclusion – Which is Best

Going through all the details surrounding the Dremel 4000 and 4200, we come to the conclusion that the two tools are the same. However, if you want to get a more accurate picture, you have to compare Dremel 4000 vs 4200 by looking at all the available variables.

Although the Dremel 4200 vs Dremel 4000 comparison ends in a tie, many users find the EZ change system a bit challenging to use.  However, this does not affect your overall experience with the tool. The tool of choice depends on your skill level as well as the kind of project that you want to undertake.

If you are a professional, you can do with the 4200. However, if you are just starting out, the 4000 will be fine.

Check out the price of the Dremel 4000

Related Pages